GTN banner
Goddard Space Flight
													      Center Sonoma State University
													  Education and Public
													  Outreach
Data Reduction for the GTN

Index

Reducing CCD images taken with telescopes like those in the GTN is a somewhat involved process. There are several steps that must be completed to convert your raw images into scientifically meaningful data. Even if your primary goal is to take "pretty pictures" several of these steps are important. This page is designed to give you a rough guide for reducing your images and to point to resources that you will need or want to have for that purpose. For a more thorough discussion of the topics on this page see the AAVSO CCD Observing Manual. Another excellent resource for all aspects of astronomical image processing is The Handbook of Astronomical Image Processing by Richard Berry and James Burnell. To learn how to actually perform the steps discussed below you will have to consult the documentation for whatever software you are using for the reductions.

   

STEP 1 - Image Calibration

Image calibration refers to corrections that must be made to CCD data before you can extract scientific measurements from them. If you do not know what flat fields, darks and biases are, see the page on Image Calibrations before you begin this overview. For the rest of this page we assume that you have a set of calibration images and science images. We will describe how you should apply the calibrations to your science images. In certain instances, the calibration images might have been made for you. In any case, you will have to get a set of calibration images in order to reduce your data.

A Note About Image Calibration

During each of the steps outlined in our description of image calibration you should check the resulting images and make sure that the output is reasonable. A bad calibration correction will give you bad science images at the end, so you want to be sure that at every step you are not introducing any errors. Visually inspecting your images is one way to check that things are not going horribly wrong. You can also do hand-calculations with a few images to check pixel values. You definitely want to find any discrepancies now, before you havve spent hours working on science images that will have to be redone because the calibration was done incorrectly. Keeping these things in mind, click on Image Calibration to read a general overview of the steps required to calibrate your CCD data. Note that this gives only an overview of what is to be done; though the steps will be identical, the particulars of how to execute them will vary depending on the software package you use.

   

STEP 2 - Image Stacking

After you have calibrated your science images you must stack them. This operation is much like combining your flats, darks and biases, but there is one important difference: Your science images contain objects, and before you combine them you have to align the objects so that they add together. Aligning your images is called registering them. If your images are not registered before you combine them you will end up with multiple instances of each object, one from each of your raw images, in your final image. Of course, if your tracking is very good or if you have an auto guider then your images might already be well enough aligned (you should check to make sure). In any event, other than this very important difference, you merge science images for the same reason you merge calibration images: it helps remove cosmic rays and it improves the statistics in the final image.

The details of how to align and merge images will vary for different software packages. Some make it very easy by analyzing the field and calculating the necessary offsets for each image automatically. They then register the images and add them together. Other packages require you to determine the positions of a subset of stars from which you calculate offsets and apply shifts by hand. You should look at the documentation for your own software to find the details on how to register and combine images.

   

STEP 3 - Doing the Reductions

Once you have calibrated and stacked your images you are ready to begin the real reductions... and about time! If you wish to determine the brightness of objects in your field, look at the photometry section. If you want to do astrometry, go to that section - you actually might not have to bother about calibration if all you want is positions of things, though for the most accurate positions possible calibration will still be required.

Photometry

Photometry is the measurement of the brightness of objects in your images. There are two types of photometry, relative and absolute. For most GTN projects you will probably want to do relative photometry, in which you compare your program objects to other objects in the image. This is also often called differential photometry. If you want to do absolute photometry instead, then you must do additional observations of photometric standards in order to put your comparison objects on an absolute brightness scale. For a description of how to do either kind of photometry you should consult a reference like the AAVSO CCD Observing Manual. To gain a basic understanding of how photometry works, have a look at our Basic photometry and Astrometry page. Again, the particular steps you must complete to do your photometry will depend on the software package you are using. Consult its manual for details.

Astrometry

Astrometry is the measurement of positions of objects in your images. This is always done relative to some set of reference objects within an image. In the event that you have absolute positions (RA, DEC) of these reference objects, you will be able to put all the objects in your field on this same absolute system. To do this you need a reference catalog of stars to determine the absolute position of your field. Read our astrometry page to learn how to do this.

MaximDL Photometry Exercise

We have put together a step by step tutorial that takes you through the process of reducing a set of images using MaximDL. This is one of the popular packages used on Windows. A list of other packages can be found in the table below.

Start the Photometry Exercise

   

Software Packages

You have many choices when deciding what software package to use for your data reductions. When choosing a package you should consider the computer platform you will be using, your comfort level with computing and coding and how much money you want to spend, among other things. There are currently on the market an array of packages specifically designed for astronomical data reductions. Some of them have elaborate and well thought out user interfaces and predefined functions to make your reductions nearly automatic. Other packages are not much more than high-level programming languages that will require you to write a lot of your own routines (though it is often possible to download routines that other people have written off the World Wide Web). We list a few of these below. Click on the name of each package to get a short synopsis of what we see as their strengths and weaknesses. The synopsis will show up in a popup window, so be sure that your browser will allow popups, at least while you are viewing this page. The link at the right will take you to the download site for the software.

If you know of additional good packages that we should include in this list, please send us an email (to one of the contacts at the bottom of the page).

Aperture Photomety Tool is a Java tool for doing simple aperture photometry. It is maintained at NASA/IPAC. Since it is written in Java it will run on any platform. The GUI is very simple and easy to use and understand. The package also comes free of charge. AIP4Win is a comprehensive package that comes as part of an excellent book on image processing: The Handbook of Astronomical Image Processing. This is highly recommended for Windows users, but it will not run natively on other platforms. Equinox is a Mac OSX package that comes in several versions. One part is a planetarium package that can be used to plan observations. The other is a CCD controller/imaging package that can be used for data reductions. They can be purchased separately, or bundled together. We have not run this, so we cannot comment on how it works. CCDSoft is the camera controller/image software package from Software Bisque. This is a full-feature package that will do everything you need for photometry and astrometry. Deep Sky Stacker is a free package that can be used to register and combine images. ImageJ is a java version of the NIH Image package. It was developed to view PET scans, MRI and the like, but it works very well for astronomical purposes. Of course, it does not contain native astronomy related tasks, but many of these have been written and are available on the web. Since it is JAVA it runs on all platforms. MaximDL is another full-featured package for Windows. It can both control your CCD camera and do photometric and astrometric manipulations, pretty much all you need. Mira is a powerful image processing package for Windows. It will do all you need to do. Interactive Data Language (IDL) is a high-level programming language for image and array manipulation. It is used by many professional astronomers, and libraries exist for most standard tasks. It runs on all platforms but is quite expensive. Image Reduction and Analysis Facility (IRAF) was developed by and for professional astronomers. It will do everything you need to do, and then some. However, it is not the easiest package to learn. Will run on any unix type OS and is available free of charge. Perl Data Language (PDL) is an open-source answer to IDL. It is based on the PERL and C programming languages and claims to work with arrays as easily as IDL. We have not used PDL, but if you are the kind of person who likes to write your own code you might want to try it. Currently under development, follow link in right column.
Astronomical Software Packages
PackagePlatform(s)Download
Aperture photometry Tool (APT)
free
Mac OSX, *-nix, Windows Aperture photometry Tool (NASA/IPAC)
SalsaJ (Simplified ImageJ)
free
Mac OSX, *-nix, Windows Hands-On Universe
ImageJ (Java NIH Image)
free
Mac OSX, *-nix, Windows NIH
Equinox
$
Mac OSX Microprojects
AIP4Win
$
Windows Berry and Burnell
CCDSoft
$$
Windows Software Bisque
Deep Sky Stacker
free
Windows Deep Sky Stacker
MaximDL
$$
Windows Cyanogen
Mira
$$
Windows MiraMetrics
IDL
$$$
Mac OSX, *-nix, Windows ITT
IRAF
free
Mac OSX, *-nix NOAO
PDL
free
Mac OSX, *-nix, Windows Perl Data Language
Cost Key for Left Column: $ - least expensive, $$ - more expensive, $$$ - most expensive (Check for educational discounts from all these vendors.)

If you have a question about the GTN, please contact one of the "Responsible SSU Personnel" below.

This page was last modified on Thursday 17th April 2014 @ 14:16pm

Science Mission Directorate Universe Division

Responsible SSU Personnel:

Dr. Kevin McLin (mclin at universe dot sonoma dot edu)

Privacy, Security, Notices